Facility Equipment
Facility Equipment
DALTON INDUSTRIES FACILITY/CAPABILITY
Land and Buildings
- 9 Acres
- Over 90,000 Square Feet Under Roof
- 34 Overhead and Jib Cranes
- 35 Feet Under Crane Hook
- 40 Ton Crane Capacity in Machine Shop
- 65 Ton Crane Capacity in Fab Shop
- 100 Ton Crane Capacity in Assembly Shop
- (1) 20’ X 20’ Exit Door and (1) 20’ x 29.5’ Exit Door
- Railroad Siding on Property
Fabrication Equipment
- (1) Cincinnati Press Brake: 1,000 Ton Hydraulic, 20’ Bed, 16’ Between Columns
- (1) 500 Ton Hydraulic Straightening Press
- (1) 400 Ton Wheel Press
- (1) 200 Ton Hydraulic Straightening Press
- (1) Marvel (Series 81A) Bandsaw: Max. Vice opening 21-1/2”, Capability 18” x 20”
- (10) AC Welders
- (14) Mig Welders
- (1) Ransome Roll Welder: Two Head Welding, One Head Carbon Arc Capability, Maximum: 144″Ø x 252″Long, Weight 100,000Lbs
- (1) Roll Welder: Two Head Welding Capability, Maximum: 38″Ø x 185″Long, Weight 20,000Lbs
- (1) Roll Welder: Two Head Welding Capability, Maximum: 38″Ø x 195″Long, Weight 20,000Lbs
- (1) Climax Bore Welder (BW3000): Maximum: 14″ to 56″O.D., .88″ to 54″I.D., 39″ Reach
Shot Blast and Stress Relieve
- (1) Shot Blasting Room: 14’ x 14’ x 26’
- (1) Stress Relief Furnace: 15’ x 15’ x 25’, with a Table Travel 25’, Max. Temp 1800°F
- (1) Meta-Lax (Series 2400) Vibratory Stress Relief Machine
Burning Equipment
- (1) Linde (CM-56) 3 Torch / 1 Plasma Head NC Controlled Burner: 100″ x 420″, 8 ½” Thick Torch Cut
- (1) CMC (2010XH) 3 Torch / 2 Plasma Head NC Controlled Burner: 120″ x 540″, 12” Thick Torch, 2″ Thick Plasma Cut
Related Equipment
- (1) 10,000 Lb. Capacity Hyster Fork Lift Truck
- (2) Semi-Tractors and Trailers: (1) Flat Bed 8′ x 45’Long, (1) Lowboy 8′ x 22.5′ Long
- (1) 6,300 Lb. Capacity Flat Bed Stake Truck
Machine Facilities
- (1) (B-2) Shibaura (BF13AQ) Floor Mill Horizontal Boring: Travels: 240″ Horizontal, 120″ Vertical, 36″ Spindle
- (1) (B-1) Shibaura (BF-16A) Floor Mill Horizontal Boring: 360” Horizontal, 144” Vertical, 6.3″ Spindle at 42″
- (1) (B-3) Toshiba (BF130B) CNC Floor Mill Horizontal Boring: Travels: 354″ Horizontal, 118″ Vertical, 39″ Spindle 78″ x 98″ Rotary Table; 40,000 Lbs Capacity
- (1) (B-7) Vanguard (TH6916) CNC Floor Mill Horizontal Boring: Travels: 590” Horizontal, 157” Vertical, 78″ Combined length Spindle & Ram, 6.3″ Spindle 98″ x 118″ Rotary Table; 88,160 Lbs Capacity
- (2) (B-9, B-10) Bridgeports
- (1) (B-8) HAAS (VF3) CNC Table Mill Vertical Boring: X40″,Y20″, Z25” Max. Table Load 3,500 Lbs
- (1) (B-11) HAAS (VF9) CNC Table Mill Vertical Boring: X80”, Y40”, Z30” Table Load 4,000 Lbs
- (2) (B-4, B-6) Shibaura (BT10b) Table Mill Horizontal Boring: Travels: 70” Horizontal, 62” Vertical, 4″ Spindle 55” x 63” Built-In Rotary Table
- (1) (B-12) Toshiba (BP150R22) Table Mill Horizontal Boring: Travels: 160″ Horizontal, 100″ Vertical, 88″ Spindle 70″ x 86″ Table; 44,000 Lbs Capacity
- (1) (V-1) Gray (60 Series 84″) Vertical Turning Mill Ram: 48″ Vertical Travel, 54″ Horizontal Travel Turret: 30″ Vertical Travel, 57″ Horizontal Travel 84″Ø Table 96″ Max. Swing; 12,000 Lbs Capacity
- (1) (L-8) Mori Seike (TL-5) CNC Lathe 10”Ø x 73”Lg
- (1) (L-3) Summit (_3x60) Lathe 12”Ø x 60”Lg
- (1) (L-4) Poreba (TR70B) Lathe 16″Ø x 92″Lg
- (1) Clausing Lathe (LMT-103) 18″Ø x 72″Lg
- (1) (L-2) Poreba (TRP93x4M) Lathe 24″Ø x 170″Lg
- (1) (L-9) Dainichi (DL95) CNC Lathe 24”Ø x 192”Lg
- (1) (L-11) Okuma (LB45II) CNC Lathe 25″Ø x 159″Lg
- (1) (L-10) Poreba (TR135B2x7) Lathe 40″Ø x 266″Lg
- (1) (L-1) Giessen (185-743-6P) Lathe, Double Carriage 107” Swing Over Cross Slides x 252” Center
- (1) Okamoto Surface Grinder (ACC-124DX7) 12″H Under Wheel x 12″W x 24″Lg (930Lbs Capacity
- (1) Powermatic Drill Press
- (3) Small Drill Presses
- (1) (R-1) Radial Drill – 20” Column x 120” Arm
- (1) (L-6) Balancing Machine – 30″Ø x 150″ Lg.
- Length: 25 ft.
- Width: 15 ft.
- Height: 15 ft.
- Slide Travel: 25 ft.
- Maximum Temperature: 1800°F
Large Roll Welder
- Maximum Diameter: 12 Ft.
- Two Head Welding Capability
- Maximum Weight: 120,000 Lbs
- One Head Carbon Arcing
- Maximum Length: 21 ft.
CNC Horizontal Boring
- 600″ Horizontal Travel
- 6″ Spindle Diameter
- Vertical Milling Head
- Coolant and Chip Conveyer
- 168″ Vertical Travel
- 55 Ton NC Rotary Table
- Universal Milling Head
- 84″ Spindle Travel
- Head Magazine
- Vertical Extension Head
Burning Equipment
- 3 Torch
- 1 Plasma NC Controlled Burner 100” X 420”
- Up to 8 ½” Thick
Large Engine Lathe
- 107″ Swing
- 107″ Swing over Cross Slides
- 252″ Center